Welcome to Würth Malaysia For trade customers only

Tractor oil TRIATHLON® UTTO 10W-30

Tractor oil TRIATHLON UTTO 10W-30
ENGOIL-(TRACTOR-UTTO)-10W30-208LTR

Art.-no. 0897010305

EAN 4049557754581

Individual price display after login
Tractor oil TRIATHLON® UTTO 10W-30

Art.-no. 0897010305

Individual price display after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Multi-purpose oil for forestry and agricultural machinery

Advanced multigrade oil (UTTO = Universal Tractor Transmission Oil)


Specifically for forestry machinery and agricultural machinery.



Reduces the types of oil required


For use in gearboxes, hydraulic systems and wet brakes.

Notice

Observe the operating specifications provided by the tractor manufacturer. Compatible with all commercially available engine oils. However, it is only fully effective when used unmixed.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Especially well-suited for modern combined drive systems (gearbox/hydraulic system), including wet brakes

Contents

208 l

Type of oil

Mineral

Viscosity grade

10W-30

Approved for engine oils

API GL 4

Recommended applications for engine oils

John Deere J20D, New Holland M2C 41B, New Holland M2C 48B, Ford M2C-86-B, Ford M2C-53-A, Ford M2C-134-A, Ford M2C-134-B, Ford M2C-134-C, Ford M2C-134-D, Allison C4, Caterpillar TO-2, CASE (IHC) MS 1204, CASE (IHC) MS 1205, CASE (IHC) MS 1206, CASE (IHC) MS 1207, CASE (IHC) MS 1209, Massey Ferguson M1135, Massey Ferguson M1141, Massey Ferguson M1143, Massey Ferguson M1145, SAME- Lamborghini, Fendt, Deutz, Schlüter, Landini, Renault, Volvo BM WB 101, AGCO Q-1826, CASE (IHC) B6

Shelf life from production

60 Month

Density

0.885 g/cm³

Density conditions

at 15°C

Min. flashing point

230 °C

Pour point

-36 °C

Suitable glove:
 
Product
Description
Vinyl chemical and moisture protective glove
Vinyl chemical and moisture protective glove
Description:
Permeation level: 6
Fully dipped protective glove with vinyl coating on cotton jersey lining
Chemical protective glove, Butyl
Chemical protective glove, Butyl
Description:
Permeation level: 4
Gas-tight and resistant to exhaust gases produced by combustion processes
Chemical protective glove made from chloroprene and latex
Chemical protective glove made from chloroprene and latex
Description:
Permeation level: 1
Cotton flocking on the inside
Nitrile chemical protective glove with cotton velour finish inside
Nitrile chemical protective glove with cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove long, heavy-duty design
Nitrile chemical protective glove long, heavy-duty design
Description:
Permeation level: 6
Chemical protective glove chloroprene
Chemical protective glove chloroprene
Description:
Permeation level: 2
Heavy-duty design
Chemical protective glove nitrile with backing fabric
Chemical protective glove nitrile with backing fabric
Description:
Permeation level: 6
Robust, liquid-tight protective glove with polyamide support fabric that combines optimum chemical protection, secure grip and comfort
Disposable nitrile glove
Disposable nitrile glove
Description:
Permeation level: 2
Liquid-proof, food-safe disposable glove
Disposable nitrile grip glove
Disposable nitrile grip glove
Description:
Permeation level: 2
Unique, diamond texture for optimal grip
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information