Sealant remover

Sealant remover
SEALREM-300ML
Art.-no.: 08931000
Selected article: Other versions
Questions? +603-8021 0200
price/PU Prices for customers after login
x
Exclusively for trade customers Register now and access more than 20,000 products
Product information:
  • Catalogue page as PDF 1
  • Technical data sheet 1
  • Clearance certificate 1 | 2
Specification
Removes sealing materials, adhesives, paints, etc. in just minutes

Firm consistency

No dripping off vertical surfaces

Notice
  • Protect painted surfaces
  • Check compatibility prior to application
  • Not suitable for sensitive plastics, PVC and synthetics

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Wide range of uses on metal, wood, glass, ceramic, polyethylene and polypropylene

Instructions
  • Shake the can well
  • Spray the surface and let it take effect for 5–10 minutes
  • Process the surface using a suitable tool
Technical information

Contents

300 ml

Smell/fragrance

Alcohol

Colour

Light yellow

Chemical basis

Mix of organic solvents

pH value

10.6-11.0

Density/conditions

0,79 g/cm³ / at 20°C

Shelf life from production

24 Month

AOX-free

Yes

Silicone-free

Yes

Suitable glove:
Permeation level: 3
Cotton velour lining
Permeation level: 4
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time Permeation level

< 10 min

0

≥ 10 min

1

≥ 30 min

2

≥ 60 min

3

≥ 120 min

4

≥ 240 min

5

≥ 480 min

6

Important information:
The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.
Last viewed
 
Top