Rost-Off Blue Ice rust remover

Cracking effect

• By cooling the material surface down to -45 °C, micro-fine cracks occur in the corrosion layer at the connection points. These "crack open" the rust, ensuring better penetration of the active agent.

Visual cold indicator

• When cooled to a minimum temperature of -5 °C, the sprayed area turns blue. The processing temperature is achieved.

Optimum rust removal

• Rust is quickly penetrated and seized screws are loosened


• Heavily rusted screw connections are loosened without damaging them

Corrosion protection additives for optimum corrosion protection

• Provides lasting protection against further corrosion

Resin- and acid-free

Silicone-free

Compatible with rubber and seals

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.