For detailed information, other images and documents, please select individual articles from the following table.
Special, highly active system cleaner for 2- and 4-stroke engines.
Register now and access more than 20,000 products
Packaging unitThe packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Structure of our article numberThe article number is made up of the following: VVVVAAABBB
Information on price and image displayPrice per packaging unit (PU):
QuantityThe quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
Possible to clean without removing components
Hard-to-reach areas can be easily accessed
Excellent cleaning performance
Quiet engine running
Faults caused by dirty throttle valves or carburettors are rectified.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Chemical Products are restricted and it is not allowed to deliver this item outside Malaysia
Removes deposits and impurities in the intake and throttle valve area. Calibrated drill holes and nozzles can also be cleaned with this process. Suitable for catalytic converters.
When the engine is turned off, generously spray all parts to be cleaned and allow the active agent to react for 2–3 minutes. Then, with the engine running for approx. 30 seconds, spray into the intake and throttle valve area, while slightly increasing the speed to loosen the deposits.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!