Welcome to Würth Industry Malaysia For trade customers only

Exclusively for business customers

Service-hotline +603 8021 0149

Purchase on account

more than 30,000 products

Wuerth App

Petrol air intake cleaner Special cleaner

Petrol system cleaner

Art.-no. 5861112300

Prices for customers after login

Petrol air intake cleaner Special cleaner

Art.-no. 5861112300

Prices for customers after login



Exclusively for trade customers

Register now and access more than 20,000 products

For all carburettors and petrol injection engines

Cleans injection valves, the combustion chamber and the intake area

  • Reduces increased fuel consumption

  • Improves engine running and response

Protects against valve burning by having clean and tight valve seats

A high level of cleaning is achieved in intake valves, in the combustion chamber and intake area thanks to the washing-active, fuel-compatible active agents in a cleaning solvent.


Spray hose not included in scope of delivery.

The usage instructions are recommendations based on the tests we have conducted and our experiences. We do not assume any liability for a specific application result due to the large number of applications and storage/usage conditions. Insofar as our free customer service provides technical information or acts as an advisory service, this service is provided under the exclusion of any liability, unless the advice or information given falls within the scope of our specified, contractually agreed scope of services or the consultant was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Chemical Products are restricted and it is not allowed to deliver this item outside Malaysia

Product information

Würth Catalogue(X)

Catalogue page as PDF 1  |  2  |  3  |  4


Safety data sheet


Clamp off the vacuum hose at a suitable point and insert the spray probe. Spray half of the can contents evenly into all intake ducts while moving the probe back and forth, with the engine at operating temperature and approx. 2000 rpm. Turn the engine off and leave the product to take effect for approx. 30 minutes. Start the engine and drain the rest of the product. Dosage: 1 can for a 4-cylinder engine, 2 cans for engines with 6 cylinders or more.


300 ml





Chemical basis


Shelf life from production

24 Month


0.814 g/cm³

Density conditions

at 20°C

Min. flashing point

30 °C