Welcome to Würth Malaysia For trade customers only

Compressor oil WK 100

Compressor oil, WK100
PNOIL-WK100-1LTR

Art.-no. 0893050506
EAN 4046778229027

Prices for customers after login
Compressor oil WK 100

Art.-no. 0893050506

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Reliable lubrication of air compressors

Universally applicable for all types of air compressors



Exceeds DIN 51506, VDL


  • Highly reliable lubrication

  • Highly resistant to ageing


Contains additives to protect against corrosion and wear


Optimum protection against corrosion, even when compressing wet media



Excellently suited for Würth compressors

Notice

Only suitable for bearing lubrication on turbo-compressors.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For lubricating piston and rotary compressors up to a compression temperature of +220°C.

Contents

1000 ml

Container

Bottle

Colour

Transparent

Smell/fragrance

Characteristic

Chemical basis

Mineral oil

Shelf life from production

36 Month

Pour point

-9 °C

Density

882 kg/m³

Min. flashing point

270 °C

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information