Clear lacquer 2C HS Reflow - CLRLAC-2C-REFLOW-5LTR

Clear lacquer 2C HS Reflow - CLRLAC-2C-REFLOW-5LTR - 1

Clear lacquer 2C HS Reflow

Name: Clear lacquer 2C HS Reflow
Brand: Würth
SKU: 5866201105

2C HS clear lacquer Reflow
CLRLAC-2C-REFLOW-5LTR

Art.-no. 5866201105

EAN 4062856481385

All versions

Prices for customers after login

Clear lacquer 2C HS Reflow

Art.-no. 5866201105

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +60123453493

High-solid acrylic clear varnish with increased resistance to scratches for complete and partial painting of passenger cars and commercial vehicles. Special varnish based on reflow technology.

Resistant to micro-scratches/car wash facilities

Varnish flows together at micro-scratches due to UV radiation and heat

Brilliant clear varnished condition, optimum application

Ideal for painting over solvent and water-based paints

Maximum permissible VOC content: 840 g/l of product category 2 (e) of the German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV). Max. VOC content: 565 g/l

Solids content of base material in %: 49.2

Notice

Protect from frost. The substrate must have the correct pre-treatment depending on the substrate. In certain cases, using a suitable pre-cleaner or a pre-coat is recommended.

Maximum permissible VOC content: 840g/l of product category 2 (e) German Ordinance on Solvent-Based Paints and Lacquers (ChemVOCFarbV) Max. VOC content: 565 g/l

Application area

Application method
	Pressure [bar]	Nozzle [mm]	Spray passes	Thinner
Air/flow cup	3.5-4	1.3-1.4	1-2	10-15 %
HVPL	2	1.3-1.4	1-2	10-15 %
Brush on/roll on	-	-	-	-
Airless	-	-	-	-

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Due to its resistance to micro-scratches (e.g. produced by car washes) and chemicals, the 2-component HS reflow clear lacquer is particularly well suited for high-quality complete and partial painting of passenger cars, motorcycles and commercial vehicles.

Instructions

Mixture by weight: 2:1 with 2-component HS hardener for top coats and acrylic thinner

Thinning adjustment 10-15 vol. % depending on coat thickness

Contents	5 l
Chemical basis	Two-component acrylic
Smell/fragrance	Characteristic
Colour	Colourless
Viscosity/consistency	Liquid
Drying time	30 min
Conditions for drying time	at 20°C
Gloss level	High gloss
Density	0.995 g/cm³
Max. temperature resistance	120 °C
Density conditions	at 20°C
Application conditions	at 10°C and 75% relative humidity
VOC concentration (CH)	505.5 g/l
Shelf life from production	36 Month
Min. proportion of solids	48.5 %
Max. proportion of solids	50.5 %
Max. yield (area)	8 m²
Min. yield (area)	6 m²

Drying
	Dust-dry	Touch-dry	Assembly-ready	Can be painted over
Object temperature 20°C	25-30 minutes	6-8 hours	24 hours
Object temperature 60°C	5 min	30 min	1 hour

Additive article:

Product

Description

Quantity

Price
/PU

Half face mask HM 173

HALFMASK-HM173-DBFILTCON

Art.-no. 0899173

With bayonet connection in accordance with EN 141

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).