Shopping basket0

Brass anchor - DWL-BRS-M10-12X35

Brass anchor

Brass anchor
DWL-BRS-M10-12X35

Art.-no. 0904310

EAN 4045727665923

All versions

Individual price display after login

Brass anchor

Art.-no. 0904310

Individual price display after login

Quantity

PU

x 100 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Login/Register
Call customer service: +60123453493

Female thread with metric thread as an inexpensive alternative for outdoor use, for concrete and solid brick

Knurled surface for good grip

Screwing a screw/threaded rod with a metric thread causes the anchor to expand and anchor to the substrate

Corrosion-resistant

Low anchoring depth

Small edge and axial clearances

Suitable for push-through and cotter-pin installation

Can be applied without setting tools

Drill the hole

Clean the drill hole

Knock in anchor until flush

Mount component

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

|

|

Application area

For secondary fastening indoors and outdoors

For fastening components to concrete and solid brick

For spaced mounting in conjunction with a threaded rod

Internal diameter	10 mm
Anchor length (l)	34 mm
Embedding depth (h s)	35 mm
Drill hole depth (t)	40 mm
Nominal drill-bit diameter (d 0)	12 mm
Centre-to-centre distance (a)	80 mm
Edge clearance (a r)	80 mm
Minimum component thickness (d)	80 mm
Hole diameter in component (d Bau)	10.5 mm
Max. attachment height (d a) - condition	Dependent on screw length
Outer diameter	12 mm
Area of application	Awning/canopy, Sanitary fixing
Suitable for use in the following materials	Concrete, Solid limestone, Solid brick
Type of assembly	Pre-setting installation, Stand-off installation
Material	Brass
Application condition dowel	Dry interiors

Performance data
Anchor diameter [mm]			M4	M5	M6	M8	M10	M12
Recommended Tensile load	Concrete ≥ C20/25	F_rec. [kN]	0,45	1,00	1,40	1,90	2,50	3,45
	Solid brick		0,40	0,70	1,10	1,40	1,65	2,00
	Solid sand-lime brick		0,40	0,75	1,20	1,50	1,75	2,40
Recommended transverse load	Concrete ≥ C20/25	F_rec. [kN]	0,40	0,90	1,20	1,90	2,50	3,50
	Solid brick		0,35	0,65	1,00	1,40	1,65	2,00
	Solid sand-lime brick		0,35	0,65	1,00	1,50	1,75	2,40

Additional accessory:

Product

Description

Quantity

PU

Price
/PU

Plus Quadro-L Vario hammer drill bit

Plus Quadro-L Vario hammer drill bit

DRL-HAM-PLUS-Q-LV-D10,0-L115-WL50MM

Art.-no. 0648051011

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

x 2 pcs

Plus Quadro-L Vario hammer drill bit

Plus Quadro-L Vario hammer drill bit

DRL-HAM-PLUS-Q-LV-D12,0-L160-WL100MM

Art.-no. 0648051216

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

x 2 pcs

Plus Quadro-L Vario hammer drill bit

Plus Quadro-L Vario hammer drill bit

DRL-HAM-PLUS-Q-LV-D15,0-L160-WL110MM

Art.-no. 0648051516

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

x 1 pcs

Plus Quadro-L Vario hammer drill bit

Plus Quadro-L Vario hammer drill bit

DRL-HAM-PLUS-Q-LV-D5,0-L115-WL50MM

Art.-no. 0648055011

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

x 2 pcs

Plus Quadro-L Vario hammer drill bit

Plus Quadro-L Vario hammer drill bit

DRL-HAM-PLUS-Q-LV-D5,5-L115-WL50MM

Art.-no. 0648055511

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

x 2 pcs

Plus Quadro-L Vario hammer drill bit

Plus Quadro-L Vario hammer drill bit

DRL-HAM-PLUS-Q-LV-D8,0-L115-WL50MM

Art.-no. 0648058011

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

x 2 pcs

Machinists' hammer with protective handle sheath

Machinists hammer with protective handle sheath

CRSPHAM-COVER-800G

Art.-no. 071573 80

German type in line with DIN 1041 with double-curved hickory handle

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).