Blind rivet, open, with break mandrel and countersunk head ISO 15984, countersunk head, A2/A2 stainless steel
ISO 15984 countersunk head stainless steel A2/A2
RIV-ISO15984-A2/A2-(2,5-4,5)-4,0X8,0
Register now and access more than 125,000 products
Sleeve: A2 stainless steel; mandrel: A2 stainless steel
The dimensions and tolerances defined in EN ISO 15984 must be observed.
Nominal diameter (d1) | 4 mm |
Length (l1) | 8 mm |
Head diameter (dk) | 8.4 mm |
Head height (k1) | 1.7 mm |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Min./max. grip range | 2.5-4.5 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 2700 N |
Tensile fracture load | 3500 N |
Nominal diameter x length (Ø d x l) | 4 x 8 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!