Welcome to Würth Malaysia For trade customers only

Assembly power cleaner Plus

Assembly power cleaner PLUS
ASMBYCLNR-PLUS-500ML

Art.-no. 0890107003
EAN 4099618582707

Prices for customers after login
Assembly power cleaner Plus

Art.-no. 0890107003

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Powerful special cleaner for maintenance, repair and assembly work
  • Effortlessly removes brake dust, encrusted dirt, oil, grease, resin and corrosion protection layers

  • Reduced risk and effects of fire

  • Recommended product in accordance with the German Ordinance on Hazardous Substances (protection level 2)

  • Free from AOX, aromatics, silicone and n-hexane

  • Spray jet head
Notice

Do not spray on hot parts.


Check plastic parts, rubber parts and painted surfaces for material compatibility before use.

The instructions for use are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area
  • For maintenance, repair and assembly of components subject to oily and greasy residues and resin deposits

  • During brake maintenance and repair work, as well as clutch repair work

  • Particularly effective against lacquer-type contaminants

Contents

500 ml

Colour

Colourless

Chemical basis

Hydrocarbon

Density/conditions

0.755 g/cm³ / at 20°C

Min. flashing point

-17 °C

Acetone-free

No

Silicone-free

Yes

AOX-free

Yes

VOC-free

No

Shelf life from production/conditions

24 Month / at 20°C

Sustainability

Pollutants / Emissions

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information