2-component HS hardener for top coats

Name: 2-component HS hardener for top coats
Brand: Würth
SKU: 5866400101

2K HS top coat hardener
HARD-LAC-TOPCOAT-2C-1LTR

Art.-no. 5866400101

EAN 4062856481392

All versions

Prices for customers after login

2-component HS hardener for top coats

Art.-no. 5866400101

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +60123453493

Perfectly suited for use with 2-component HS acrylic paint, 2-component clear varnish and 2-component thick coat lacquer.

Suitable for partial and full paint

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For use with 2-component HS acrylic paint, 2-component clear lacquer and 2-component thick coat lacquer.

Contents	1 l
Chemical basis	Polyisocyanate
Density	1.031 g/cm³
Density conditions	at 20°C
VOC concentration (CH)	477 g/l
Shelf life from production	12 Month
Product weight (per item)	1171 g

Suitable glove:

Product

Description

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.